To Avoid Failure, You Need To Know These Maintenance Methods For Manual Ball Valves!

2 Piece Ball Valve Pay attention to maintenance during use. The purpose of maintenance is to extend the service life of the equipment. If you do not pay attention to maintenance, the equipment is prone to failure. The following maintenance methods are worth learning from.

1. Manual ball valves should be stored in dry and ventilated warehouses, and both ends of the passage should be blocked. If the equipment is damp, the performance will be greatly affected, and it may even lose its use value completely.

2. If the manual ball valve is not used for a long time, it must be checked regularly. If the equipment is found to be dirty, it must be cleaned in time, and anti-rust oil must be applied to the processing surface. This can ensure that the equipment is in a better state and can maintain high work efficiency no matter when it is used.

3. The manual ball valve must be installed correctly, and attention should be paid to inspection during use. There are many inspection contents, including checking the sealing surface to see if the wear is serious. If it is too serious, it must be replaced. It is also necessary to see whether the packing is used normally. If it is damaged, it must be repaired or replaced. In addition, the manual ball valve must also be tested for sealing. If the sealing is not good, the performance will be greatly reduced.

4. During use, the manual ball valve must not be hit or knocked, and heavy objects must not be placed on the manual ball valve. Professional staff should be found to operate it to avoid risks caused by operational errors.

In short, the maintenance of the manual ball valve is very necessary. If it is done well, the equipment can better serve industrial production. At the same time, it can also extend the service life of the equipment. The maintenance of the manual ball valve is not difficult. The key lies in persistence. The above methods can be effective if you persist in doing them.